VW Golf/Jetta V 2WD H&R Camber Plates - 60mm upper spring ID

Fits all 2WD 2006-09 Golf V and 2006-10 Jetta V with springs that use a 60mm upper spring inside diameter.

Race camber plates (with solid spherical bearings) are great for the track, but what if you want to drive your car on the street too? That’s what the H&R  street style caster/camber plates are: A plate you can use on the street, still have the available adjustment of a race camber plate, and not have to put up with a harsh ride or replace the bearings every season.

The stock strut mount only allows about ½ ° camber adjustment and no caster adjustment. For most track cars or street cars that occasionally see the track, that is not nearly enough. The stock strut mount is also set at an angle that is suited only for that position, and puts additional bending load on the strut if it is not in its original position. These plates will allow for approximately 2 3/4 degrees of camber adjustment, and can be used for any application that is compatible with the stock upper strut mount and bearing and uses a 60mm upper spring inside diameter.